Cable tray perforated 3 m U23X Insulating cable tray according to IEC 61537: 2006 (The values indicated according to IEC 61537: 2006 have been tested under its European implementation EN 61537:2007. For support, protection and conduction of cables. Good performance outdoor, to corrosion and to chemical agents (ISO/TR 10358, DIN8061). Designed to support full load. Unex insulating cable tray with cover, by complying with the European Standard EN 50085-2-1, is considered a protecting enclosure (trunking). Impact test for trunkings: IK10 (with cover fixing). Safety: electrical; mechanical (protection against impacts 20J acc. IEC 61537; designed to work at 100% cable capacity) and in front of fire (glow-wire test at 960°C; non-flame propagator). Easy and quick mounting. No burrs at cutting. Insulating material. Length: 3m. Colour: grey RAL7035.
Unperforated cable tray U23X Insulating cable tray according to IEC 61537: 2006 (The values indicated according to IEC 61537: 2006 have been tested under its European implementation EN 61537:2007. For support, protection and conduction of cables. Good performance outdoor, to corrosion and to chemical agents (ISO/TR 10358, DIN8061). Designed to support full load. Unex insulating cable tray with cover, by complying with the European Standard EN 50085-2-1, is considered a protecting enclosure (trunking). Impact test for trunkings: IK10 (with cover fixing). Safety: electrical; mechanical (protection against impacts 20J acc. IEC 61537; designed to work at 100% cable capacity) and in front of fire (glow-wire test at 960 °C; non-flame propagator). Easy and quick mounting. No burrs at cutting. Insulating material. Length: 3 m. Colour: grey RAL7035. >Order cover separately
Butt joint connector without bolt, U23X For mechanical connection of cable tray sections. The use of bolts with clamps is recommended for all butt joints to absorb possible expansions in areas with temperature fluctuations (e.g. outdoor installations). Color: gray. Insulating material. Very stable. Absorbs expansions.
Cover cable support system U23X For the protection of cables and insulation of cable trays. Insulating material. Color: gray. Attachment by pressing on, without screws. IK10 (with cover clip for height 60mm part no. 107600072, for height 100mm part no. 107600073).
Butt joint shim w. Bolt, U23X For mechanical connection of cable tray sections. 2 bolts with clamps are supplied. The use of bolts with clamps is recommended for all butt joints to absorb possible expansions in areas with temperature variations (e.g. outdoor installations). Color: gray. Insulating material. Very stable. Absorbs expansions.
End cap, U23X For covering ends. 2 screws for mounting are included. Color: gray. Insulating material. Electrical and mechanical safety. Easy and quick assembly.
Flat arch 90°, U23X For the change of direction by 90º. Conceal the interfaces of the cable tray and the cover, for a better finish of the installation. It is recommended to install outriggers under the horizontal bend. Color: light gray Insulating material. Electrical and mechanical safety. High load capacity. No loss of cross-section in relation to the cable tray. Easy and quick assembly.
Elbow cover 90°, U23X To cover flat corners 90º. 2 SST screws are included for optional cover fixing. Colour: grey RAL7035. Insulating material. Safety: electrical, mechanical and against fire. No loss of cross-section with regard to the cable tray. Quick and easy mounting.
T-branch, U23X To realize branches of 90°. No loss of cross section. Color: light gray RAL 7035. Insulating material. Bending radius 160mm. Quick and easy assembly. No butt joints necessary. Good weathering behavior.
Cover for T-branch, U23X To cover Semi T. Colour: Colour: grey RAL7035. Insulating material. Quick and easy mounting. 4 SST screws are included for optional cover fixing. Hides the cut marks of both cable tray and cover, adding quality finish to the installation.
U-profile perforated For connecting boom to "U" connector perforated. Use metal anchors. The cut metal edges should be painted after their deburring at the unprotected interfaces to ensure the same protection as on the rest of the part. When using the mounting pin, no screws are required for fixing the cantilevers. Safe, quick and easy assembly.
U-profile perforated 2m U23X To join several levels of horizontal brackets directly to the wall. Use metal screws Ø8. Insulating material. Safety: electrical, mechanical and against fire.
U-connector, perforated To attach the perforated U-profile to the ceiling. Use metal fasteners. Safe, easy and quick to install.
Ground Connector, U23X To limit the transversal cable sag. 2 screws included. For trays of width 300 mm the use of a Fish plate for cable trays is necessary to comply with the requirements of full load transverse deflection defined by international Cable Trays Standard EN 61537. Colour: grey RAL7035. Insulating material. Adding rigidity to the installation.
Bolt with Clamp, U23X To fix the junction to the cable tray. In areas submitted to temperature changes (i.e. outdoor applications), the use of bolts in all junctions is recommended to avoid possible warping. Colour: grey RAL7035. Better absorption of possible expansions.
Horizontal joint piece, U48X Per collegare la canalina dei cavi orizzontalmente a diversi angoli. Materiale isolante. Realizzato in un unico pezzo. Il design protegge i cavi nelle creste che si verificano tra due sezioni di canaline.
Insulating bracket, U23X To fix cable trays horizontally to the wall. Fixing of the bracket to the wall: use metal screws Ø10. To achieve the maximum resistance the bracket must be properly mounted on the wall. Insulating material. Safety: electrical, mechanical and against fire. Easy and quick mounting.
Insulating side profile, U23X To fix cable trays vertically to the wall. Fixing of the cable tray to the vertical support: use metallic bolts. Fixing of the support to the wall: use metal screws Ø8. Insulating material. Safety: electrical, mechanical and against fire. Easy and quick mounting. Just one piece: more safety.
Rail, 2m, U23X To lay and support cables. This product is not designed as a supporting element for cable trays, but for cable conduction or to separate a set from the wall. Insulating material.
Protective cap omega profile To protect the profile's ends. Insulating material. Safe, easy and quick mounting.
Butt joint cover, U23X For covering the interfaces on cable tray and cover. Degree of protection IP3X. Color: light gray RAL7035. Insulating material. Easy and quick assembly.
Support bracket To fix cable trays horizontally to the wall. Fixing of the bracket to the wall: use metal screws Ø10. Fixing of 2 brackets: use screws Ref. 107600185 / 107600186. Fixing of the cable tray to the bracket: use screws Ref. 107600188 / 107600187. Safe, easy and quick mounting.
Partition wall attachment U23X For attaching the partition part no. 73830 to the cable tray. It is possible to attach cables to it with cable ties. Colour: light grey RAL 7035. Insulating material. Safe, quick and easy assembly.
Vertical Hinge, U23X For height change with adjustable angle. Can be used up to an inclination of +90° and -90°. Color: gray. Insulating material. Safe, quick and easy assembly. Accessory part for data lines.
Reinforced partition U23X For the separation of electrical circuits. For fixing the partition to the cable tray, 2 screws (66839-A2 / 66839-A4) per metre of partition are required. Colour: grey. Insulating material. Very stable. Absorbs expansion.
Assembly pin For connecting ""U"" or Omega profile perforated to outriggers. When using the mounting pins, no screws are required for fixing the outriggers. Safe, quick and easy assembly.
Cover clamp IK10, U23X For obtaining the protection degree IK10 for the cable tray with cover. Color: gray. Insulating material. Additional support of the cable tray cover against possible mechanical stress and weather conditions (wind, etc.) Safety, easy and quick assembly.
Angle connector falling U23X For vertical, falling direction changes (-45º). Color: gray. Insulating material. Additional stability for the cable tray. Accessory part for data cables. Safety and quick assembly as for butt connectors.