New LEANSAFE X3 FIBERGLAS Leansafe X3 is the patented leaning, standing and extended leaning ladder in one. Quick assembly thanks to the one-hand joint operation. The all-in-one top section for quick attachment to corners or masts, without adjusting the top section in each case. Leansafe has edge stiffening to prevent damage to the lower stile ends. Protection of working surfaces with abrasion-resistant materials on ladder feet and attachment pads. Integrated attachment with tool container and magnetic area. Leansafe is loadable up to 150 kg according to standard EN 131-4 and certified by an independent test centre.
Tread stepladder ELECTRO CLIMBO 100% GRP Tread stepladder 100% made of fiberglass! All-insulated (tested up to 30'000V), maintenance-free, corrosion and acid resistant. Comfortable standing on it due to horizontal aligned treads. Secure stand thanks to the optimized rubber feet and redundant spreading belts. Very high stability and less torsion thanks to angle cross beams between frame and treads. SUVA-compliant according EN 131.
Safety steps Pratiko Professional aluminium safety steps. Light and compact when folded. Large light metal steps 350 x 200 mm ""for safe and comfortable standing. Feet with non-slip rubber shoes. Comply with the European safety standard EN 14183. Load capacity up to 150 kg. H = height"
Telesafe XLN The XXL telescopic scaffold! 4 scaffold heights from 4.95 to 7.17 m. Slip-proof working platform 60 x 155cm with hatch. Lockable castors. Loadable up to 165 kg, EN 1004 compliant and TÜV tested.
Double Step Ladder Pikasso Very sturdy double stepladder with non-slip surface, two strong propylene straps and a step depth of 80mm. Bars and press profile rung EN 131, TÜV certification SUVA compliant
Telescopic ladder Clik Clak Can be used as a single ladder and as a stepladder for stairs. Easy to operate, snap-in aluminium joint in two positions. Working heights adjustable in rung distance. Rung spacing 300 mm. Can be pushed together compactly. Standards: EN131-1+4
Telescopic combination ladder TELESKOP KOMBI Abrasion resistant anodized sturdy light alloy ladder. Easy handling. Safe, comfortable pull-out on stable guide and slide bushings. Very compact transport mass. Easy to transport in any trunk. 90 mm deep ribbed steps. Very stable due to 2 crossbars with non-slip plastic feet. SUVA-compliant according to EN131. L = length, E = working height, B = rung width.
Telesteps Pro New Design Abrasion-resistant, anodised and stable light metal ladder. Extendable from rung to rung up to a length of 3.0, 3.5 and 4.1 m. The rung depth is 80 mm. Safe, comfortable height adjustment on stable guide and slide bushes. Very compact transport mass. Easy to transport in any car boot. L = length extended, E = working height / 1 => without foot traverse H = length minimum, B = width of ladder / 2 => with foot traverse
Telescopic leaning ladder PRIME LINE Abrasion-resistant, anodised light metal ladder with stabilisation aid (SH). Extendable from rung to rung up to a length of 4.3, and 4.9 m. Safe height adjustment on stable guide and slide bushes, contact angle of 75°. Very compact transport dimensions. Can be transported in the boot. L = extended length, E = working height, H = minimal length, B = width of the ladder
Telescopic fire ladder RESCUE The Telesteps Rescue Line is the first ladder in the world where 3 people can use the ladder simultaneously. Abrasion-resistant anodized solid light metal ladder. Extendible from tread to tread up to a length of 4.1 m. Very compact transportation volume. Easy to transport in any trunk compartments of cars. L = extended length, E = working height / TYP => without foot traverse H = minimal length, B = width of the ladder
Telescopic work platform TELESKOP PLATFORM Flexible, stable and easy to transport. The working platform is easy to fold up or down, and the platform height can be adjusted to 3 different heights from 550 - 880 mm. This allows a working height of up to approx. 2.9 m. SUVA compliant according to EN131. A = plate size, H = platform height, B = foot width.
TELETOWER Telescopic Scaffold ALU Working Height 4m The revolutionary Teletower - The first foldable and telescopic scaffold on the market. With its five dynamic scaffold heights from 1 to 2 meters standing height and a non-slip work platform of 70 x 140 cm with hatch, the Teletower is the perfect tool for any craftsman looking for a safe and flexible work scaffold. Setting up the Teletower is a breeze and can be done by just one person in only 2 minutes. The lockable wheels provide extra stability and flexibility during work. But the best part is that the Teletower can be easily transported in a car and consists of only two parts. This saves time and effort during installation and dismantling. The Teletower is not only easy to install and transport, it is also extremely robust and load-bearing. With a load capacity of up to 150 kg, you can be sure that the Teletower meets your requirements and provides you with a safe working environment.