Crimp tool kit WZ 1 Simple change of the crimp elements. Delivered with suite case, base crimp tool and crimp elements (insulated crimp eyelet connectors, connectors and flat push-in sleeves with 0,5 – 6,0 mm2, non-insulated crimp eyelet connectors with 0,5 – 10,0 mm2, cable-end sleeves with 0,5 – 16,0 mm2, non-insulated flat push-in sleeves and flat connectors with 0,5 – 2,5 mm2, push-in width 4,8 + 6,3 mm, BNC- and TNC-coaxial connector RG58, RG59, RG62 and RG71 cable).
Assembly tool, KNIPEX 97 49 66 2 (MC4) Set of two assembly tools For tightening and loosening the cable gland of MC4 solar connectors For loosening the locking mechanism of MC4 housings (also with attached locking sleeve) Tool: plastic, glass fiber reinforced
Crimping tool for MC4-EVO 2 solar contacts This crimp tool is recommended for the crimping of MC4-EVO 2 contacts. The excellent handling, easy exchange of the crimping insert bits, and the possibility of adding a positioning aid are facts in favor of these crimping pliers. • Ergonomic 2-component handle • Parallel jaws for uniform pressings • High precision ratchet mechanism for complete crimping • 1.2 tons of pressure on the crimping surface with minimum effort • Interchangeable crimp die set with high precision • Interchangeable locator for precise positioning of terminals • For male and female contacts • Made in Germany Application range: AWG 12/10/8 | 4 / 6 / 10 mm2
Self-adjusting crimping pliers Twistor T, KNIPEX 97 53 19 Crimping head can be rotated 360°, with 8 locking positions. Trapezoidal crimp profile, high capacity range from 0.14 to 10 mm². Crimping of wire end ferrules possible from almost any working position.
Crimping pliers for wire end ferrules with side entry, KNIPEX 97 53 14 For crimping ferrules according to DIN 46228 part 1 + 4. Self-adjusting adjustment to the required ferrule size.Force amplification by knee lever for fatigue- free working. High operating comfort due to handy design and low weight. Hexagonal crimping with capacity extension up to 10 mm². Hexagonal crimping for confined connection dimensions.
Crimping Pliers for RJ45 Western Plugs, KNIPEX 97 51 13 All-in-one tool for cable cutting, round cable stripping function and crimping of common RJ45 plugs. Safely crimps shielded and unshielded RJ45 Western plugs (8P8C). With adjustable retaining latch, for all common RJ45 plugs with closed and non-closed housings.
Campaign Crimping pliers, KNIPEX 97 21 215 For cutting cables, stripping wires and crimping insulated and uninsulated cable lugs and connectors and open connectors. With threaded holes for cutting Cu or Ms threaded pins with M2.6; M3; M3.5; M4 and M5. Screwed joint for high stability and smooth running.
Crimping pliers, KNIPEX 97 32 240 For cutting cables, stripping wires and crimping insulated and uninsulated cable lugs and connectors and open connectors. With threaded holes for cutting Cu or Ms threaded pins with M2.6; M3; M3.5; M4 and M 5. Screwed joint for high stability and smooth running.
Campaign Crimping pliers for wire end ferrules, KNIPEX 97 62 145 A Crimping pliers for wire end ferrules For crimping wire end ferrules DIN 46228 part 1 + 4 in the range of 0.25 to 2.5 mm². Crimping in marked trapezoidal profiles for secure connection of sleeve and conductor.
Crimping pliers for wire end ferrules, KNIPEX 97 72 180 Crimping pliers for wire end ferrules light and slim design. Easy crimping due to optimised transmission ratio. For crimping wire-end ferrules according to DIN 46228 part 1 + 4 in the range from 0.25 to 16 mm². Crimping in marked halfround profiles for secure connection of sleeve and conductor. Nine particularly deep profiles with conical side surfaces.
Campaign Crimping pliers, KNIPEX 97 52 30 Consistently high crimp quality due to precision inserts and positive lock (unlockable). Force amplification through knee lever for low-fatigue work. Good handling due to favorable handle position, low weight, short design and ergonomically shaped handles. – Application: uninsulated crimp connectors according to DIN 46267.