Tools UV

Campaign

Tool case for photovoltaics KNIPEX 97 91 01

Equipped with tools for photovoltaics With precision stripping pliers 12 12 11 with shaped blades for smaller stripping values 1.5 / 2.5 / 4.0 / 6.0 mm² With cable shears 95 16 165 for Cu-cables up to Ø 15 mm With crimping system pliers 97 43 200 A for exchangeable crimp dies; crimping pressure is precisely set (calibrated) at the factory With assembly tool (Allen key) for changing the crimp dies Scope of delivery: Without crimp inserts - please order separately. Article series 97 49 XX Impact resistant plastic case Foam insert with recesses for holding the tools, for crimp dies (not included) and positioning aids.

1 Version
Crimping tool for MC4-EVO 2 solar contacts

This crimp tool is recommended for the crimping of MC4-EVO 2 contacts. The excellent handling, easy exchange of the crimping insert bits, and the possibility of adding a positioning aid are facts in favor of these crimping pliers.

• Ergonomic 2-component handle
• Parallel jaws for uniform pressings
• High precision ratchet mechanism for complete crimping
• 1.2 tons of pressure on the crimping surface with minimum effort
• Interchangeable crimp die set with high precision
• Interchangeable locator for precise positioning of terminals
• For male and female contacts
• Made in Germany

Application range: AWG 12/10/8 | 4 / 6 / 10 mm2

1 Version
New

Pipe cutter Ø 6 - 76 mm, TubiX XL, KNIPEX 90 31 03 BK

Spring-loaded QuickLock quick-fixing system. Cuts pipe with a diameter of 6 - 76 mm and a wall thickness of up to 2 mm. With precisely ground deburrer, easy to remove.

1 Version
New

Pipe cutter Ø 6 - 50 mm, Knipex 90 23 01 BK

Perfect sanitary helper: conveniently cut and chamfer all common domestic waste water pipes made of plastic up to Ø 50 mm in one step. Tool-free changeable reversible blade made of high-quality ball bearing steel. Smooth cut: no readjustment, no deburring, reduced risk of blockages or damage to the seal.

1 Version
Pipe degrater for inside/outside Ø10...54 mm

Hardened Steel Construction Inner-Outer Reamer includes 45 cutting edges on interior cone allow for fast, clean, inner reaming and outer deburring/beveling of copper and stainless steel tubing

1 Version
Tool case for photovoltaics KNIPEX 97 91 04 V02

Équipé d'outils pour le photovoltaïque. Avec insert de sertissage 97 49 71 pour connecteur solaire MC4 (Multi-Contact) 4,0 - 10,0 mm², aide au positionnement 97 49 71 1 et kit d'outils de montage 97 49 66 2. Avec pince à dénuder de précision 12 12 12 avec lames de forme pour des valeurs de dénudage plus importantes 4,0 / 6,0 / 10,0 mm². Avec pince à sertir 97 43 200 A pour matrices de sertissage interchangeables ; la pression de sertissage est réglée avec précision en usine (calibrée). Avec coupe-câbles 95 16 165 pour câbles Cu jusqu'à Ø 15 mm. Avec outil de montage (clé à six pans creux) pour changer les matrices de sertissage. Garniture en mousse avec cavités pour le logement des outils, pour les matrices de sertissage et les aides au positionnement. Coffret en plastique résistant aux chocs. Dimensions extérieures (L x H x P) : 345 x 80 x 280 mm.

1 Version
Pipe cutter, Ø 10...42 mm

Fast and precise positioning of the cutting wheel to different pipe diameters. Comfortable: easy cutting due to high-quality needle bearings on the cutting wheel and guide rollers. Cuts pipes with Ø 10...42 mm and a wall thickness of up to 2 mm. For the electrical trade: also suitable for cutting armoured steel pipes ("Stapa pipes").

1 Version
Pipe cutter KNIPEX 90 25 20

For cutting composite pipes with diameters from 12.0 to 25.0 mm and for cut-ting flexible protective tubes with a diameter of 18 – 35 mm without damaging a potential pipe inside. A calibration arbor can be fitted, for example for Geberit composite pipes with 11.5 and 150 mm – Cutting capacities protective tubes (diameter): Ø 18 – 35 mm.

1 Version
Pipe cutter Ø 6 - 35 mm, KNIPEX TubiX® 90 31 02 SB

Fast and precise positioning of the cutting wheel to different pipe diameters. Comfortable: easy cutting due to high-quality needle bearings on the cutting wheel and guide rollers. Cuts pipes with Ø 6...35 mm (1/4”...1 3/8”) and a wall thickness of up to 2 mm. For the electrical trade: Also suitable for cutting steel armoured pipes (”Stapa pipes”). With precisely ground deburrer, easy to remove.

1 Version
Campaign

Combination pliers, KNIPEX 90 61 16 / 20

Special pliers for notching recesses in plastic strips and housings in electrical and sanitary installations. The recesses can be enlarged by pre- and post-cut-ting. Clean cut edges, no reworking of the cut profile. Easy handling. With opening spring, opening limiter and locking pawl.

from

CHF

55.00

/ 1 pcs

from

CHF

55.00

/ 1 pcs

2 Versions
BiX® Cutter for plastic pipes and sealing sleeves, KNIPEX 90 22 10

Clean cut with one grip. Particularly smart pipe cutter: cuts pipes without cutting and fits in your fist. Cuts, among other things, high-temperature wastewater pipes and empty electrical conduits in no time at all. Shortens drip and sealing sleeves during final assembly - close to the wall in accordance with standards. Cuts unreinforced plastic pipes from Ø 20 to 50 mm with wall thicknesses up to 2.4 mm. Cuts pipes cleanly and chip-free in just a few turns. Cuts drip and sealing sleeves with approx. 2-3 mm wall clearance. Rotatable knife block for cutting plastic pipes (blade in the middle) or drip and sealing sleeves (blade on the outside). With locking mechanism for safe transport. Two spare blades integrated in the tool.

CHF

31.80

/ 1 pcs

CHF

31.80

/ 1 pcs

1 Version

Do you need any support?

We will be there for you with our advice. Call us, message us, or have us call you back.

OPENING HOURS

Monday through Friday

7.00 AM to 12.00 noon / 1.00 PM to 5.15 PM

+41 (0)52 723 67 20

Request a callback

Send an email