Feed-through boards

Passage gate MULTIGATE MC-35

Suitable for the passage of cables and conduits in the building sector of electrical switchboards, installation and machine industry. The construction is based on a metallic sheet with recovering in EPDM. Also suitable in other colors on demand. 6-10 mm => 2 piece, 7-12 mm => 14 piece, 10-14 mm => 16 piece, 12-18 mm => 2 piece, 17-32 mm=> 1 piece. Incl. 4 fixation rivets.

1 Version
Passage gate MULTIGATE MC-3

Suitable for the passage of cables and conduits in the building sector of electrical switchboards, installation and machine industry. The construction is based on a metallic sheet with recovering in EPDM. Also suitable in other colors on demand. 24-54 mm => 2 piece, 30-60 mm => 1 piece, 8-12 mm => 4 piece. Incl. 4 fixation rivets.

from

CHF

27.00

/ 0

from

CHF

27.00

/ Set

2 Versions
Passage gate MULTIGATE MB-5

Suitable for the passage of cables and conduits in the building sector of electrical switchboards, installation and machine industry. The construction is based on a metallic sheet with recovering in EPDM. Possible to fix also with special rubber pins. Also suitable in other colors on demand.

1 Version
Passage gate MULTIGATE MC16

Suitable for the passage of cables and conduits in the building sector of electrical switchboards, installation and machine industry. Especially equipment with manifolds on the back for fixing tubes. The construction is based on a plastic sheet with recovering in EPDM. Also suitable in other colors on demand.

Incl. 4 fixation rivets.

1 Version
Fixation rivet SPIKE for MULTIGATE

Suitable for the fixation of all types of passage gates MULTIGATE. Set to 4 pieces.

1 Version
Passage gate MULTIGATE MC-25

Suitable for the passage of cables and conduits in the building sector of electrical switchboards, installation and machine industry. The construction is based on a metallic sheet with recovering in EPDM. Also suitable in other colors on demand. 5-7 mm => 4 piece, 8-12 mm => 4 piece, 10-14 mm => 12 piece, 14-20 mm => 4 piece, 20-26 mm=> 1 piece.

from

CHF

27.00

/ 0

from

CHF

27.00

/ Set

2 Versions
Cable entry plates, Trelleborg MULTIGATE-B10 (60x36 mm)

Cable entry plate 60 x 36 mm Suitable for the feed-through of cables and hoses in the field of control cabinets, plant construction and automation, for the B10 industrial connector opening. The construction is based on a plastic frame with TPE membrane. Hygienic design with flat surface.

1 Version
Cable entry plates, Trelleborg MULTIGATE-B16 (86x36 mm)

Cable entry plate 86 x 36 mm Suitable for the feed-through of cables and hoses in the field of control cabinets, plant construction and automation, for the B16 industrial connector opening. The construction is based on a plastic frame with TPE membrane. Hygienic design with flat surface.

1 Version
Cable entry plates, Trelleborg MULTIGATE-B24 (112x36 mm)

Cable entry plate 112 x 36 mm Suitable for the feed-through of cables and hoses in the field of control cabinets, plant construction and automation, for the B24 industrial connector opening. The construction is based on a plastic frame with TPE membrane. Hygienic design with flat surface.

from

CHF

16.00

/ 1 pcs

from

CHF

16.00

/ 1 pcs

11 Versions
Cable gland plate MULTIGATE MH-24

The cable gland platte Multigate MH-24 F 17-2 can be used for the installation of non-prefabricated cables. Thanks to its high packing density, the MH-24 can accommodate a maximum of 17 cables with different diameters. The cable gland plate with the dimensions 154 x 56 x 19 mm meets the IP65 protection rating. Also suitable in other colors on demand. 3-7 mm => 6 piece, 5-10 mm => 6 piece, 9-16 mm => 5 piece. Incl. 4 ?xation rivets.

1 Version
Cable gland plate MULTIGATE MH-24

The cable gland platte Multigate MH-24 F 30.1 can be used for the installation of non-prefabricated cables. Thanks to its high packing density, the MH-24 can accommodate a maximum of 17 cables with different diameters. The cable gland plate with the dimensions 154 x 56 x 19 mm meets the IP65 protection rating. Also suitable in other colors on demand. 3-7 mm => 4 piece, 7-20 mm => 12 piece, 10-20 mm => 1 piece. Incl. 4 ?xation rivets.

1 Version
Cable gland plate MULTIGATE MH-24

The cable gland platte Multigate MH-24 F 30.1 can be used for the installation of non-prefabricated cables. Thanks to its high packing density, the MH-24 can accommodate a maximum of 30 cables with different diameters. The cable gland plate with the dimensions 154 x 56 x 19 mm meets the IP65 protection rating. Also suitable in other colors on demand. 3-8 mm => 30 piece. Incl. 4 ?xation rivets.

1 Version
Cable entry plates, Trelleborg MULTIGATE-FL21 (196x63 mm)

Cable entry plate 196 x 63 mm Suitable for the feed-through of cables and hoses in the field of control cabinet, plant and machine construction, for FL21 (C-opening) standard cut-out. The construction is based on a metal frame with TPE membrane.

from

CHF

14.00

/ 1 pcs

from

CHF

14.00

/ 1 pcs

11 Versions
Rubber PIN for MULTIGATE MB-5

Suitable for the fixation especially for the passage gate MULTIGATE MB-5. Set to 4 pieces.

1 Version

Do you need any support?

We will be there for you with our advice. Call us, message us, or have us call you back.

OPENING HOURS

Monday through Friday

7.00 AM to 12.00 noon / 1.00 PM to 5.15 PM

+41 (0)52 723 67 20

Request a callback

Send an email