Insulating cable tray UNEX - ex stock - Order now

Insulating cable tray UNEX

Cable tray perforated UNEX 3 m, UNEX U23X

Insulating cable tray according to IEC 61537: 2006 (The values indicated according to IEC 61537: 2006 have been tested under its European implementation EN 61537:2007. For support, protection and conduction of cables. Good performance outdoor, to corrosion and to chemical agents (ISO/TR 10358, DIN8061). Designed to support full load. Unex insulating cable tray with cover, by complying with the European Standard EN 50085-2-1, is considered a protecting enclosure (trunking). Impact test for trunkings: IK10 (with cover fixing). Safety: electrical; mechanical (protection against impacts 20J acc. IEC 61537; designed to work at 100% cable capacity) and in front of fire (glow-wire test at 960°C; non-flame propagator). Easy and quick mounting. No burrs at cutting. Insulating material. Length: 3m. Colour: grey RAL7035.
>Order the lid separately

from

CHF

215.05

/ 6 m

from

CHF

215.05

/ 6 m

11 Versions
Edge protection profile ST PVC

Edge protection tape with steel insert for covering cut sheet ends.

from

CHF

182.50

/ 50 m

from

CHF

182.50

/ 50 m

2 Versions
Butt joint connector without bolt, UNEX U23X

For mechanical connection of cable tray sections. The use of bolts with clamps is recommended for all butt joints to absorb possible expansions in areas with temperature fluctuations (e.g. outdoor installations). Color: gray. Insulating material. Very stable. Absorbs expansions.

from

CHF

186.00

/ 50 pcs

from

CHF

186.00

/ 50 pcs

2 Versions
Weighting stone

Roof support designed for use in photovoltaic and air-conditioning installations. It is compatible with cable trays, cable ladders or tubes for cables. Safe, easy and quick assembly: "ready-to-install" support that stays in place thanks to its own weight. No need to fix it to the floor. The support consists of an insulating rail (made of halogen-free U48X material) and a concrete base. Corrosion-resistant material with good weather and UV behaviour.

from

CHF

69.50

/ 1 pcs

from

CHF

69.50

/ 1 pcs

2 Versions
Unex sliding nut M8 in galvanized steel C6 for secure installation

The Unex sliding nut with spring M8 made of galvanized steel C6 is a high-quality product, specifically designed for connecting cable trays and cable ladders to insulating support rails or STRUT profile rails according to BS 6946. It offers easy and quick installation as well as maximum safety. The corrosion resistance is class 6 according to EN 61537. Available in grey, the sliding nut impresses with durability and reliability.

1 Version
Unex Screw DIN 6921 M8X25 in Stainless Steel V4A (AISI 316)

The Unex screw DIN 6921 M8X25 in stainless steel V4A (AISI 316) is perfect for demanding fastening tasks. With corrosion resistance class 9B according to EN 61537, it ensures secure, quick, and easy installation. Designed to fasten cable trays 66 and cable ladders 67 to insulating support rails or STRUT profile rails with the sliding nut 60710-A4, it also connects partitions to cross members and anchors cable trays to ballast stones.

1 Version
Installation trunking 3m, UNEX U23X grey

For distribution. Suitable for outdoor use. Complete range with all necessary fittings, available in white and grey. Homogeneity with the rest of the installation's elements. 1 cable retainer every 0,5m is included. Length: 3m. Grey. Safety: electrical (insulating material, IP4X mounted on wall); mechanical (protection against impacts IK08); and in front of fire (glow-wire test at 960°C; non-flame propagator). Easy mounting. The cover is pressure mounted (no need to slide it). The cable retainer retains the cables and allows for independent access to each circuit. Homogeneity of colours between the trunking and the fittings. Can be painted. Removable divider, pressure mounted.

from

CHF

318.50

/ 6 m

from

CHF

318.50

/ 6 m

9 Versions
Insulating cable ladder, UNEX U23X

System made of recyclable material for supporting and guiding power and communication cables of small and large cross-sections. For indoor and outdoor installations with a carrier spacing between 2 and 3 m. Insulating cable ladder with good resistance to corrosion and chemicals and good behavior to UV radiation and weathering. A robust system designed for work under full load and for which grounding is not necessary.

from

CHF

307.15

/ 6 m

from

CHF

307.15

/ 6 m

10 Versions
Cover cable support system UNEX U23X

For the protection of cables and insulation of cable trays. Insulating material. Color: gray. Attachment by pressing on, without screws. IK10 (with cover clip for height 60mm part no. 107600072, for height 100mm part no. 107600073).

from

CHF

156.95

/ 12 m

from

CHF

156.95

/ 12 m

8 Versions
End cap, UNEX U23X

For covering ends. 2 screws for mounting are included. Color: gray. Insulating material. Electrical and mechanical safety. Easy and quick assembly.

from

CHF

27.10

/ 2 pcs

from

CHF

27.10

/ 2 pcs

11 Versions
Flat arch 90°, UNEX U23X

For the change of direction by 90º. Conceal the interfaces of the cable tray and the cover, for a better finish of the installation. It is recommended to install outriggers under the horizontal bend. Color: light gray Insulating material. Electrical and mechanical safety. High load capacity. No loss of cross-section in relation to the cable tray. Easy and quick assembly.

from

CHF

100.20

/ 2 pcs

from

CHF

100.20

/ 2 pcs

11 Versions
Elbow cover 90°, UNEX U23X

To cover flat corners 90º. 2 SST screws are included for optional cover fixing. Colour: grey RAL7035. Insulating material. Safety: electrical, mechanical and against fire. No loss of cross-section with regard to the cable tray. Quick and easy mounting.

from

CHF

46.70

/ 2 pcs

from

CHF

46.70

/ 2 pcs

8 Versions